Air Fryer Heating Element Not Working? [How To Fix]

We all know the feeling of anticipation when we’re about to air fry our favorite meals, only to be left disappointed when the heating element doesn’t cooperate. It’s frustrating, right? But don’t worry, you’re not alone.

In fact, did you know that heating element issues are one of the most common problems faced by air fryer owners? But fear not, because we’ve got you covered.

In this article, we’ll dive into the causes of air fryer heating element malfunctions, power cycling, and how to fix the issue. So, grab a cup of coffee, sit back, and let’s get your air fryer back in working order!

How does the heating element in an air fryer work?

The heating element in an air fryer is a component that radiates hot air circulated by the fan. It consists of coils that heat up and emit hot air from the top, which then circulates inside the air fryer with the help of a large fan.

This hot air cooks the food inside the double-walled food chamber, resulting in evenly cooked and crispy food. The heating element is an essential part of an air fryer and without it, the device is useless.

What are the causes of a faulty air fryer heating element?

1. Manufacturer Defect

Manufacturer defects can cause the heating element of an air fryer to stop working. If there is a manufacturer defect, it can lead to issues with the air fryer’s heating element, which is responsible for transforming electrical energy into heat through a series of metal coils.

If the heating element breaks down due to overheating caused by power surges or prolonged use, the fan will continue to blow cold air around the food, and it will not cook properly.

Manufacturer defects can be a real pain because they cannot be easily fixed, and it is the manufacturer’s responsibility to replace the defective product.

Therefore, if your air fryer isn’t switching on due to a manufacturer defect, you should contact the manufacturer, and they should be able to offer you a replacement.

2. Damage to the Element

The possible causes of a damaged air fryer heating element are:

  • Rough handling,
  • Faulty cable,
  • Damaged fuse or power outlet.

Rough handling is the most likely cause of a damaged heating element as it is brittle and easily breakable. A faulty cable or damaged fuse or power outlet can also disrupt the normal operation of the heating element.

3. Faulty Power Cord

A faulty power cord can cause the heating element of an air fryer to malfunction in many ways. The small cables contained within the cord can be easily damaged by bad practices such as keeping them tangled or pressed against other objects.

This can lead to short circuits and breakers tripping continuously. Signs to look out for include an absence of heat and the air fryer not functioning properly. If you suspect that a damaged power cord is the issue, try not to operate your appliance until you fix it as doing so could cause it to become even more damaged.

4. Poorly Working Temperature Sensors

The thermal sensor in an air fryer controls the temperature of the unit and helps the heating element attain the required cooking temperature. If the temperature sensor is faulty, it can cause the heating element to malfunction, preventing it from reaching the set temperature.

This issue can be challenging to identify as a defective thermal sensor may not be apparent until an expert inspects the air fryer. Troubleshooting steps for a faulty temperature sensor involve contacting customer support or the manufacturer if the air fryer is under warranty.

5. Overuse of the Air Fryer

Overuse of the air fryer can cause a faulty heating element, leading to overheating and damage. It is recommended to use the air fryer for a maximum of 30 minutes at a time and to allow it to cool down before using it again.

Overuse can lead to inconsistent heating and irreparable damage to the appliance. To prevent overuse, it is important to follow the recommended usage time, avoid overcrowding the food basket, and allow the appliance to cool down properly after each use.

Proper cleaning and use of specific accessories can also help prevent overuse.

6. Damage to the Latch System

A damaged latch system in an air fryer can cause a faulty heating element. The latch system is responsible for holding the lid or drawer securely in place, which ensures that the heating element is activated and the food is cooked properly.

What are the causes of a faulty air fryer heating element?

If the latch is broken or damaged, the lid or drawer may not close properly, preventing the heating element from turning on. This can be caused by manufacturing defects, wear and tear, or even something getting jammed in between the air fryer and the lid/drawer.

7. Poorly Designed Cooking Chamber

A poorly designed cooking chamber can cause a faulty air fryer heating element. This is because the cooking chamber of an air fryer is responsible for the even distribution of hot air that ensures the food is cooked evenly.

If there are any design flaws in the cooking chamber, it could lead to an uneven distribution of hot air, which would affect the heating element’s performance, making it seem like the air fryer is not heating up properly.

For instance, if the cooking chamber has too many small holes at the bottom, it may not allow enough hot air to circulate, leading to unevenly cooked food. Overloading the basket can also prevent the basket from closing correctly, which would affect the even distribution of hot air and temperature control, leading to unevenly cooked food.

Additionally, some air fryer models may have a smaller cooking chamber, which could make it easier and quicker to heat but may also lead to problems with the even distribution of hot air.

It is important to follow the manufacturer’s guidelines on proper food placement and portion size to ensure optimal cooking results and prevent closure issues.

Checking to see that the lid is fully closed is also essential, as most air fryers will not work if the compartment is not fully closed and secured both for safety and the efficiency of cooking.

In conclusion, a poorly designed cooking chamber can have a significant impact on an air fryer’s heating element, affecting its performance and making it seem like the air fryer is not heating up correctly.

It is essential to ensure that the cooking chamber is designed correctly and that the manufacturer’s guidelines are followed to prevent any issues that could affect the air fryer’s performance.

8. Lack of Maintenance

Lack of maintenance can cause a faulty air fryer heating element due to the buildup of long-term stains and stubborn dirt that can dwindle its performance.

Regular cleaning and maintenance can prevent this issue by wiping the exterior clean with a damp sponge or cloth after each use and using high-grade commercial chemicals to remove stains. Avoid clustering food together to ensure proper airflow and hot air circulation.

Proper maintenance and cleaning will help extend the lifespan of your air fryer and prevent costly replacements.

9. Electrical Problems

Common electrical problems that can cause a faulty air fryer heating element include a bad outlet, a damaged power cord, a blown thermal fuse, a faulty heating element, and a fried circuit board.

  1. A bad outlet can prevent the air fryer from receiving electricity and cause the heating element to malfunction.
  2. A damaged power cord can disrupt the normal operation of the heating element, while a blown thermal fuse can cause the air fryer to stop working altogether.
  3. A faulty heating element can prevent the air fryer from heating up properly, while a fried circuit board can cause the air fryer to malfunction in various ways.

Troubleshooting these issues may require a screwdriver and a multimeter, but it is best to leave repairs to the professionals if you are not experienced with electrical appliance mechanics.

10. Poor Quality Materials

Poor quality materials used in the construction of an air fryer can cause a faulty heating element. Cheaper materials may not be able to withstand the high temperatures required for air frying, leading to a breakdown of the heating element.

This can result in uneven cooking and even complete failure of the appliance. In addition, low-quality materials may also be more prone to staining, which can further damage the heating element and reduce its lifespan.

It is important to invest in a high-quality air fryer made with durable materials to ensure optimal performance and longevity.

How to check if the air fryer heating element is working?

How to check if the air fryer heating element is working?

To check if the air fryer heating element is working, follow these steps:

  1. Unplug the air fryer and turn it upside down. The heating element is located above the cooking chamber, and you should be able to see the coils.
  2. Visually inspect the heating element for any signs of damage or wear and tear. If the coils are broken or damaged, the heating element may need to be replaced.
  3. Use a multimeter to test for continuity. Set the multimeter to the resistance mode and touch the probes to the heating element’s terminals. If the multimeter reads zero, then the heating element is working correctly.
  4. Check for loose connections or faulty thermostats. If the heating element is not working correctly, check the connections to make sure they are secure. If the connections are loose, tighten them and check if the heating element is working correctly. If the connections are secure, then the thermostat may be faulty and may need to be replaced.

By following these steps, you can quickly and easily check if your air fryer heating element is working correctly. Remember to always unplug the air fryer before performing any maintenance or repairs.

How to fix an Air Fryer Heating Element that is not working?

Step 1: Check the Air Fryer Power Cord is plugged in and also check for a damaged power cord

To check if the Air Fryer Power Cord is plugged in, ensure it is properly connected to both the air fryer and the power socket. Look for any visible indications of damage, such as broken wires or visible splits. Check that the cable’s head is correctly positioned in the wall outlet.

Step 2: Check the Outlet to Your Air Fryer

To check the outlet for your air fryer, follow these simple steps:

  1. Unplug the air fryer from the outlet.
  2. Plug another appliance into the outlet to check if it’s working properly.
  3. If the other appliance works plug the air fryer back in.
  4. Make sure the air fryer’s power cord is securely plugged into the outlet and the air fryer itself.
  5. Turn on the air fryer and select your desired program.

By following these steps, you can ensure that the outlet is not the issue and that your air fryer’s heating element should be working properly.

Step 3: Check the Air Fryer Heating Element

The heating element is responsible for cooking food in an air fryer. If your air fryer is not heating up correctly, it is essential to check the heating element. To check the heating element, unplug the air fryer and turn it upside down.

The heating element is located above the cooking chamber. Visually inspect it for any damage or wear. You can also use a multimeter to test the heating element for continuity.

Based on the findings of the inspection, take appropriate measures such as replacing the heating element or seeking professional repair. It is crucial to maintain the heating element by cleaning it and following the air fryer instructions regularly.

Step 4: Check Your Air Fryer Have a Broken Temperature Switch

The temperature switch in your air fryer is responsible for activating the heat generation process, and if it fails, your appliance won’t heat up. To check if your air fryer has a broken temperature switch, follow these steps:

  1. Unplug your air fryer and let it cool down.
  2. Locate the screws at the top or bottom of your appliance and remove them with a screwdriver.
  3. Open the air fryer and find the switch behind the external dial knob.
  4. Test the switch with a multimeter for continuity. If there is no continuity, the switch is broken and needs to be replaced.
  5. To replace the switch, refer to your model’s manual for instructions. Remember to unplug the appliance and let it cool down before attempting any repairs.

By following these steps, you can determine whether your air fryer has a broken temperature switch and replace it to get your appliance heating up again.

Step 5: Fix Air Fryer’s Broken Drawer Or Lid

A functional drawer or lid is crucial for the proper functioning of an air fryer. A broken latch or misaligned components may prevent the drawer or lid from closing properly, causing the appliance to not heat up.

  1. To fix the issue, first, check for loose screws or hinges and tighten them if needed. If the latch is broken, try fixing it yourself or contact the manufacturer for a replacement.
  2. Ensure that the basket is properly aligned inside the drawer pan and follow the user manual’s instructions. Regular cleaning and maintenance of the air fryer are also essential to prevent closure issues.

However, avoid attempting any electrical work or disassembling the appliance without professional assistance. Seek expert help for more advanced repairs. Remember to stay patient and work with the manufacturer to resolve any issues.

Step 6: Check and Set the Air fryer Temperature and Time Correctly

To fix an Air Fryer Heating Element that is not working, follow these steps to check and set the temperature and time correctly:

  1. Check the knobs or digital controls of your air fryer and make sure the temperature is set properly. If your air fryer has analog controls, make sure the knob is set to the desired temperature. If your air fryer has digital controls, check the settings and set the temperature accordingly.
  2. Check the timer of your air fryer. The timer is what tells the air fryer how long it should stay on and stay at the temperature that you have set. If the timer is not working, it is not going to be able to keep the air fryer on for the amount of time you have set.
  3. Make sure the overall settings of your air fryer are correct. Sometimes, the settings can get out of whack and make it difficult to heat your food and cook it fully.
  4. Preheat the air fryer before cooking to the desired temperature. This typically takes between 3-5 minutes.
  5. While the air fryer is preheating, prepare your food. Cut it into small pieces to ensure even cooking and season it with your desired spices and seasonings.
  6. Once the air fryer is preheated, load the food into the basket. Don’t overcrowd the basket, as this can result in uneven cooking.
  7. Set the cooking time and temperature according to the instructions in your recipe. If you’re unsure, start with a lower temperature and cooking time and increase it as needed.
  8. Once the cooking cycle is complete, remove the basket from the air fryer and let it cool for a few minutes. Serve and enjoy your delicious and crispy food!

By following these steps, you will be able to check and set the temperature and time correctly and troubleshoot any issues with your air fryer heating element. Remember to always check the temperature settings before cooking, and to preheat the air fryer for best results.

Step 7: Check the Amount of Food in the Air Fryer, Do not Overload the Basket

Overloading the basket of your air fryer can cause the heating element to malfunction because the food is too compacted to allow for proper air circulation and even cooking. This can lead to the air fryer overheating, which can cause a fire hazard.

To avoid overloading, it is recommended to never load the basket more than 2/3 of its capacity. It’s better to cook in smaller batches to ensure proper air circulation and even cooking. By following these guidelines, you can ensure successful air frying and avoid any potential safety hazards.

Step 8: Clean the Air Fryer Regularly

Regular cleaning of your air fryer is essential to prevent the heating element from malfunctioning. To clean your air fryer, unplug it and wait for it to cool down. Remove the basket, tray, and pan and wash them with soap and warm water or place them in the dishwasher.

Wipe down the main unit and control panel with a damp cloth to eliminate any food splatters or grease residue. Be cautious when cleaning the heating coil, located at the top of the unit, and refer to the manufacturer’s instructions for specific cleaning guidelines.

Soak the food basket and drawer in soapy water for 30 to 60 minutes before cleaning again. Make a paste of baking soda and water to scrub any baked-on or hard residue.

Rinse off the paste and wipe dry with a clean cloth. Once you’ve finished cleaning, dry the air fryer completely before using it again. Regular cleaning will ensure the longevity and proper functioning of your air fryer.

Step 9: Replace the Heating Element or Buy a new Air Fryer

To replace the heating element in an air fryer, first, identify the type of element needed by checking the user manual. Unplug the air fryer and let it cool off before turning it upside down to see the heating element. Remove the incorrect part and replace it with the new one. No tools are typically required.

When purchasing a new air fryer, consider wattage, size, and price range. Higher-wattage air fryers will cook food faster. Choose a size that fits your needs and kitchen space. Prices can vary greatly, so determine your budget beforehand.

Additionally, consider features such as temperature control, timer, and ease of cleaning. It is recommended to read reviews and compare different models before making a purchase.

Can You Replace the Heating Element in an Air Fryer?

Yes, the heating element in an air fryer can be replaced. The heating element is responsible for providing the necessary hot air to cook the food, and it may need to be replaced due to excessive use or damage over time. Replacing the heating element is a straightforward process that you can do yourself.

How to detach the heating element from the air fryer

To safely detach the heating element from your air fryer, you must first unplug the device and let it cool down.

Next, turn the appliance upside down to access the heating element. Check the air fryer manual to determine the type of heating element used in your machine.

Once you know what type of heating element you need, use the appropriate tools to remove the old one. If you’re unsure which tools to use, consult the manual or contact the manufacturer.

Be sure to wear gloves to protect your hands from burns. For some air fryers, you may need to remove screws or clips to access the heating element. Once you’ve removed the old heating element, replace it with a new one and reassemble the air fryer.

Remember to follow all safety precautions and consult the manual if you have any questions or concerns.

Troubleshooting an air fryer heating element at home requires knowledge of electrical appliance mechanics. It is recommended to leave the repair to the professionals if you have never done anything like this before.

If the air fryer stays cold several minutes after turning it on, the heater is faulty and there is no repair for a dead unit.

Here is a helpful video on how to replace an air fryer heating element:

Conclusion

In conclusion, the causes of an air fryer heating element not working can range from power issues to faulty wiring. Power cycling is an important step in troubleshooting the issue, as it can often reset the system and fix the problem.

If power cycling doesn’t work, checking the wiring and replacing the heating element may be necessary.

Proper maintenance and troubleshooting techniques are crucial to prevent future problems and ensure the air fryer is working efficiently.

By fixing the heating element, users can enhance their overall cooking experience and enjoy the many benefits of owning an air fryer. Remember to always follow the manufacturer’s instructions and handle the appliance with care.

FAQs

How do you power cycle an air fryer?

To power cycle, an air fryer, unplug it and wait for at least ten minutes to ensure it fully resets. Then, plug it back in, fix the basket properly, and select the desired program. If the heating element still doesn’t work, turn it off and allow it to cool down completely before pressing the reset button located at the base.

Be cautious and refer to the instruction manual for specific details on how to turn on and off your air fryer.

Can You Remove The Heating Element From Air Fryer?

Yes, the heating element in an air fryer can be removed. To do so, simply turn the air fryer upside down and place your hand on top of the upper wall to remove the heating element. It can be replaced, repaired, or cleaned as necessary. It is not required to clean the heating element every time you clean the air fryer, but it can accumulate dirt, grease, and debris over time.

Why is my air fryer element not heating?

An air fryer’s heating element may not be working due to several reasons. One possible cause is improper maintenance or cleaning, which can cause a buildup of grease and grime on the heating element’s surface. Another factor is a faulty thermal sensor that regulates the unit’s temperature and helps it reach the required cooking temperature.

Can air fryers be repaired?

Air fryers can be repaired depending on the warranty coverage and the cause of the malfunction. Most manufacturers offer free repairs as long as the problem is due to factory defects or normal operating conditions. Common issues that can be fixed include faulty power cords, heating elements, and fans.

However, if the air fryer has a fault in its build or is beyond repair, it may need to be replaced. Check the warranty and product recalls, contact the manufacturer or the store where you purchased it, and consider the repair costs before deciding to replace it.

Gladys